중국 비디오 채널 NanJing TranzBrillix Linear Motion Co., Ltd.
잡담 저희에게 연락하십시오
집 비디오 재생 목록 홈페이지

HGH25CA 25mm 헤비 CNC 리니어 가이드 블록 | HIWIN HG25 호환 갠트리 라우터용

리니어 가이드
November 23, 2025
카테고리 연결: CNC 리니어 가이드
잡담 저희에게 연락하십시오
태그:
#CNC linear rail with warranty #CNC linear rail set with warranty #CNC linear guide rail 35mm high rigidity
개요: Wondering how it compares to other options? See the demo and decide for yourself. This video provides a detailed walkthrough of the HGH25CA 25mm Heavy CNC Linear Guide Block, showcasing its compatibility with HIWIN HG25 systems and demonstrating its high-rigidity performance for gantry routers and CNC machinery.
관련 제품 기능:
  • Engineered as a 100% interchangeable alternative to the HIWIN HGH25CA, matching original datasheet specifications.
  • Features a 4-row circular arc design with 45° contact angle for equal load capacity in all four directions.
  • Constructed from GCr15 Bearing Steel, hardened to HRC 60-62 for superior wear resistance.
  • Offers basic dynamic load rating of 26.48 kN and static load rating of 36.49 kN for heavy-duty applications.
  • Available in multiple accuracy classes including C (Normal) and H (High) precision options.
  • Includes preload options Z0 (Light) for general automation and ZA (Medium) for CNC mills/lathes.
  • Comes with mounting bolts (M6 x 20) and grease nipple for proper installation and maintenance.
  • Packaged vacuum sealed in anti-rust bag with individual boxing for optimal protection.
자주 묻는 질문:
  • Is this linear guide block compatible with HIWIN HGH25CA systems?
    Yes, this 25mm linear guide block is engineered as a 100% interchangeable alternative to the HIWIN HGH25CA, matching all original datasheet specifications for dimensions, load ratings, and stiffness.
  • What lubrication is required before using this linear guide block?
    The blocks are shipped with anti-rust oil only. You must grease them before use with Lithium Soap-based Grease (NLGI No.2), filling approximately 5 cm³ per block until grease overflows slightly.
  • What are the available accuracy and preload options for this guide block?
    Accuracy options include C (Normal) at +/- 0.1mm and H (High) at +/- 0.03mm. Preload options include Z0 (Light) for general automation and ZA (Medium) recommended for CNC mills and lathes.
  • How should this linear guide block be properly installed?
    Ensure the mounting surface is machined flat, press the block reference edge firmly against the mounting shoulder, and tighten the 4 M6 bolts diagonally in an X-pattern in 2-3 stages for proper installation.
관련 동영상
HIWIN WEH27 Linear Guide Block | Wide Type High Moment Linear Way 00:34

HIWIN WEH27 Linear Guide Block | Wide Type High Moment Linear Way
리니어 가이드
November 26, 2025
Original HIWIN HGW25 Flange Type Block – Wide Linear Guide for CNC & Automation 00:26

Original HIWIN HGW25 Flange Type Block – Wide Linear Guide for CNC & Automation
리니어 가이드
November 26, 2025
HIWIN HGL15 Linear Guide Block | Low Profile Heavy Load Type 00:26

HIWIN HGL15 Linear Guide Block | Low Profile Heavy Load Type
리니어 가이드
November 26, 2025
Black Oxidation TBI Ball Spline SLT40 Ball Spline For CNC Machine 00:33

Black Oxidation TBI Ball Spline SLT40 Ball Spline For CNC Machine
Ball Spline
April 17, 2025
Shaft support SK 00:28

Shaft support SK

Linear Shaft Support
April 22, 2025
Cutting Work SRJ-65C Jaw Coupling 65×90mm Flexible Coupling Plastic Couplings 00:35

Cutting Work SRJ-65C Jaw Coupling 65×90mm Flexible Coupling Plastic Couplings
Coupling
April 18, 2025
선형 베어링 SDM 00:32

선형 베어링 SDM
Linear Bearing
April 23, 2025
Linear shaft 00:12

Linear shaft
Linear Shaft
April 21, 2025
Shaft support SHF 00:30

Shaft support SHF
Linear Shaft Support
April 22, 2025
coupling 00:27

coupling

Coupling
April 18, 2025